1 2 4 6 8 Channel Low Level 5V Solid State Relay Module SSR G3MB-202P 250V 2A Output With Resistive Fuse For Arduino
1. Product Introduction:
1-way 5V low-level solid-state relay with fuse 250V 2A, can be used for circuit control switch.
2. Product parameters:
Supply voltage: DC 5V Supply current: 160mA
Input control signal voltage: This module is triggered at a low level, and the triggering conditions are as follows
① Low level 0-2.5V triggers the relay to work after the load circuit is energized;
② High level 3.3-5V triggers the relay to disconnect the load circuit and cut off power.
Load voltage: 250V AC Load current: 2A
3. Product features:
(1) The product has short-circuit protection, overload protection, and overheating protection functions
(2) 1 relay can independently trigger the control load circuit, and the relay has a status indicator light. When the relay is closed, the LED light will turn on, otherwise it will not turn on.
Tips
1. Module power supply: The power supply must be DC, and the voltage must match the voltage of the relay.
2. The non electrified output of the relay acts as a switch to control the on/off of the load circuit.
1. Product Introduction
2-channel 5V low-level solid-state relay with fuse 250V 2A, can be used for circuit control switch.
2. Product parameters
Supply voltage: DC 5V Supply current: 160mA
Input control signal voltage: This module is triggered by a high level, and the triggering conditions are as follows.
① High level 3.3-5V triggers the relay to work after the load circuit is energized;
② Low level 0-2.5V triggers the relay to disconnect the load circuit and cut off power.
Load voltage: 250V AC Load current: 2A
3. Product features
(1) The product has short-circuit protection, overload protection, and overheating protection functions.
(2) 2 relays can trigger the control load circuit separately, and each relay has a status indicator light. When the relay is engaged, the LED light will turn on, otherwise it will not turn on.
Tips
1. Module power supply: The power supply must be DC, and the voltage must match the voltage of the relay.
2. The non electrified output of the relay acts as a switch to control the on/off of the load circuit.
1. Product Introduction
4-channel 5V low-level solid-state relay with fuse 250V 2A, can be used for circuit control switch.
2. Product parameters
Supply voltage: DC 5V Supply current: 160mA
Input control signal voltage: This module is triggered by a high level, and the triggering conditions are as follows
① High level 3.3-5V triggers the relay to work after the load circuit is energized;
② Low level 0-2.5V triggers the relay to disconnect the load circuit and cut off power.
Load voltage: 250V AC Load current: 2A
3. Product features
(1) The product has short-circuit protection, overload protection, and overheating protection functions
(2) 4 relays can trigger and control the load circuit separately, and each relay is equipped with a status indicator light. When the relay is engaged, the LED light will turn on, otherwise it will not turn on.
Tips
1. Module power supply: The power supply must be DC, and the voltage must match the voltage of the relay.
2. The non electrified output of the relay acts as a switch to control the on/off of the load circuit.
1. Product Introduction
6-channel 5V low-level solid-state relay with fuse 250V 2A, can be used for circuit control switch.
2. Product parameters
Supply voltage: DC 5V Supply current: 160mA
Input control signal voltage: This module is triggered by a high level, and the triggering conditions are as follows
① High level 3.3-5V triggers the relay to work after the load circuit is energized;
② Low level 0-2.5V triggers the relay to disconnect the load circuit and cut off power.
Load voltage: 250V AC Load current: 2A
3. Product features
(1) The product has short-circuit protection, overload protection, and overheating protection functions
(2) 6 relays can trigger and control the load circuit separately, and each relay is equipped with a status indicator light. When the relay is engaged, the LED light will turn on, otherwise it will not turn on.
Tips
1. Module power supply: The power supply must be DC, and the voltage must match the voltage of the relay.
2. The non electrified output of the relay acts as a switch to control the on/off of the load circuit.
1. Product Introduction
8-channel 5V low-level solid-state relay with fuse 250V 2A, can be used for circuit control switch.
2. Product parameters
Supply voltage: DC 5V Supply current: 160mA
Input control signal voltage: This module is triggered by a high level, and the triggering conditions are as follows
① High level 3.3-5V triggers the relay to work after the load circuit is energized;
② Low level 0-2.5V triggers the relay to disconnect the load circuit and cut off power.
Load voltage: 250V AC Load current: 2A
3. Product features
(1) The product has short-circuit protection, overload protection, and overheating protection functions
(2) 8 relays can trigger and control the load circuit separately, and each relay is equipped with a status indicator light. When the relay is engaged, the LED light will turn on, otherwise it will not turn on.
Tips
1. Module power supply: The power supply must be DC, and the voltage must match the voltage of the relay.
2. The non electrified output of the relay acts as a switch to control the on/off of the load circuit.
