This device is based on XIAO ESP32S3 and Wio-SX1262 LoRa module. Coupled with an exquisite 3D – printed casing, it is equipped with an 868 – 915MHZ wide frequency range and 2dBi gain external antenna. It can support 2~5km single channel lorawan gateway and meshtastic communication. Through the GPIO port, it can be paired with GNSS modules and other additional modules.
Feature
🌱High RF performance: Supports LoRa (862 – 930MHz), 2.4GHz Wi – Fi, and BLE 5.0 dual – wireless communication. When connected to an external antenna, it enables remote communication over a distance of 2~5km (LoRa) and 100m + (Wi – Fi / BLE).
🌱LoRaWAN Hub: Pre-flashed with Single channel LoRaWAN, it is ready to work once powered on.
🌱3D casing Design: Measuring 22x23x57mm, this device features a black ABS material with an extensive temperature range (- 40℃ ~ 100℃), making it ideal for outdoor and space – constrained projects.
🌱Powerful MCU Board: Incorporate the ESP32S3 32-bit, dual-core, Xtensa processor running at up to 240MHz, mounted multiple development ports, Arduino / MicroPython supported.
🌱Elaborate Power Design: Includes a Type-C USB interface, multiple GPIO/I2C/UART interface and lithium battery charge management.
Versatile Hardware for Multiple Applications: Can be developed into a node or router for Meshtastic, a device for Single Channel LoRaWAN Gateway, or a LoRa & LoRaWAN sensor.
Specification
|
Specification |
Parameter |
|
Basic |
|
|
Processor |
ESP32-S3R8, Xtensa LX7 dual-core, 32-bit processor running up to 240 MHz |
|
Memory |
On-chip 8M PSRAM & 8MB Flash |
|
Wireless |
Complete 2.4GHz Wi-Fi subsystem BLE: Bluetooth 5.0, Bluetooth mesh, LoRa: Based on Semtech SX1262, supports 862-930MHz |
|
Interface |
1x UART, 1x IIC, 1x IIS, 1x SPI, 11x GPIOs (PWM), 9x ADC, 1x User LED, 1x Charge LED 1x Reset button, 1x Boot button |
|
Power |
Input voltage (Type-C): 5V Input voltage (BAT): 4.2V |
|
Charging battery current: 100mA |
|
|
Operating Temperature |
-40 ~ 65°C |
|
Antenna |
|
|
Type |
SMA to I-PEX External Antenna |
|
Max Gain |
2 dBi |
|
Dimension |
13.0x195mm |
|
Installation |
Install on the outside of the enclosure |
|
Distance |
2~5km in open environment |
|
Application |
Suitable for most scenarios, designed for indoor and outdoor |
|
Mechanical |
|
|
Dimension |
22x23x57mm |
|
Material |
ABS |
|
Weight |
37.1g |
Hardware Overview
|
Wio-SX1262 extension board diagram |
 |
|
XIAO ESP32S3 front indication diagram |
 |
|
XIAO ESP32S3 back indication diagram |
 |
|
XIAO ESP32S3 Pin List |
 |
Application
- LoRaWAN Single Channel Gateway:
The most cost-effective single-channel LoRaWAN gateway for connecting multiple LoRaWAN sensors and transmitting data to LoRaWAN Network Servers such as The Things Network and Chirpstack.
- LoRa/LoRaWAN Sensor:
A mini LoRaWAN sensor, ideal for beginners exploring LoRa/LoRaWAN. It can be used with the XIAO extension board and Grove sensors for rapid prototyping.
- Meshtastic Node&Router:
What is Meshtastic?
Meshtastic is an open-source wireless communication project designed to create a mesh network system using low-power LoRa devices. This allows devices to communicate flexibly and cost-effectively without relying on traditional mobile networks or Wi-Fi. It’s suitable for use in various extreme environments and outdoor activities.
If you’re interested in Meshtastic, you can explore it by following the firmware flashing tutorial.
Part List
|
Wio-SX1262 and XIAO ESP32S3 kit with 3D-Printed Enclosure |
x 1 |
|
2dBi-868-915MHZ-SMA Antenna |
x 1 |
|
20cm USB type C cable |
x 1 |
